Name: DCA 1
SKU: 51DCA001

(Klicka för en större bild)

St:

Betala från 93 kronor i månaden

Totalbelopp	3 993 kr
Uppläggningsavgift	550 kr

Avtalstid	Månadsavgift	Restvärde
12 mån	296 kr	799 kr
24 mån	154 kr	799 kr
36 mån	118 kr	399 kr
48 mån	93 kr	399 kr

Samtliga belopp är exkl. moms

Företagsleasing via Wasa Kredit

– den smarta finansieringslösningen

Wasa Kredit äger varorna under leasingperioden, ert företag har nyttjanderätt. Månadsavgiften är avdragsgill. I slutet av avtalstiden köper du loss varorna för restvärdet. Företagsleasing erbjuds för köp från 2 400 till 2 000 000 kronor.

Så här gör du:

Lägg varorna i varukorgen och gå till kassan.

Välj mellan avtalstiderna 12, 24, 36 eller 48 månader.

Avtalsprocessen är automatiserad och kreditkontroll görs direkt i kassan.

Slutför beställningen med signering av BankID av bolagets firmatecknare.

När avtalet godkänts kan varorna levereras.

Artikelnummer:51DCA001

Enhet:st.

Lagerstatus:I lager (lev. ca. 4-8 vardagar)

Remotely controlled amplifier.

2 remote-controlled zones (120 W + 120 W).

Integrated matrix of 8 inputs to 2 outputs.

4 stereo inputs + 1 Phantom micro input.

3 modes: stereo, parallel and 2 zones.

Additional output for monitor (line).

Password protection to avoid unwanted handling.

Beskrivning

DCA 1

Mixing amplifier with digital audio matrix

DCA 1 is a versatile mixing amplifier with digital audio matrix (8in-2out). It can be remotely controlled from a third party controller (RS 232/485 via ASCII or DMX).

It features two amplified output zones (120 W RMS per channel) and eight mono inputs. Thanks to its microprocessor, it is possible to set up a digital matrix-mixer and control each zone independently or be used as a 2 zone amplifier with remote control input and volume.

Thanks to the RS 485 port, it is possible to use 4 DMX channels to set up the output gain and select the audio source of each output. This all-in-one solution is especially adapted to installations like restaurants or small shops, taking into account that it can be easily integrated itself into an existing network managed by a third-party controller.

Features:
- Mixing amplifier with digital audio matrix (8 in / 2 out).
- 2 independent zones (120 W RMS per zone).
- 8 mono inputs, one of them with selectable mic priority.
- 4 DMX channels to set up the output gain and select the audio source of each output.
- Full integration in existing networks managed by a third-party controller (RS 232/485 via ASCII or DMX).
- Additional output available for monitor (Line).
- Large LCD display and controls available on front panel.
- Password protection to avoid unwanted handling.

Technical data DCA 1:
- Number of input channels: 1 Mic/Line (stereo) + 3 stereo Line.
- Number of output channels: 2 (monitor and powered).
- Line inputs sensitivity: 775 mV / 0 dBu.
- Mic input sensitivity: 7.7 mV / -40 dBu.
- Input impedance: 20 k.
- Frequency response: 20 Hz - 20 kHz.
- S/N ratio: > 96 dB.
- THD+N: <0.01%.
- Protections: Overheat, short circuit, DC protection, CLIP.
- Output power: 2 x 120 W RMS (4 ).
- Operation modes: Stereo, Parallel, Zone.
- Connectivity: RS232/RS485-DMX.
- DMX channels: 4.
- Display: Blue backlight 2x16 alphanumeric LCD.
- Rear panel connectors: 4 x RCA double (line inputs), 1x XLR3(mic input), 3x Euroblock_3 pin(connectivity), 2 x euroblock_2 pin (powered output), 1x RCA double (monitor output), 1x IEC (Main supply).
- Front panel controls: 1x Encoders (Variation,Navigation), 4 x push switch (direct input selection).
- Indicators: LCD display, 4 x green led (direct selection), 6 x led (power amplifier status).
- Main supply: AC 120 or 240 V, 60/50 Hz.
- Power consumption: 250 W.
- Dimensions (WxHxD): 483 x 44 x 262 mm.
- Weight: 2.5 kg.