Installed sound amplifier
Suitable for almost any installation, this versatile installed sound amplifier features 4 independent outputs of 250 W with their own tone controls and independent volume. It supports low and high impedance loads.
PA 4100 features 4 audio inputs with volume control that can be independently set up as Mic or Line inputs with +48 V phantom power, phase inversion and High-pass filter functions (selectable by dip-switch blocks). The first Mic input has a selectable priority circuit. It also features two Aux inputs, remotely triggerable chime, siren and telephone paging.
Features:
- Installed sound amplifier with 4 independent zones (250 W each).
- 4 configurable input sources (Mic/Line +48 V, Phantom supply, phase inversion, high-pass filter).
- 2 Aux inputs (Line), chime, siren and tel. paging.
- 3U rack enclosure.
Technical data PA 4100:
- Output Power (RMS): 4 x 250 W.
- Audio inputs: 4 Mic/Line, 2 AUX level.
- MIC inputs (Impedance/Sensitivity): 600 /2.8 mV / -48.83 dBu.
- LINE (Impedance/Sensitivity): 3 k /316 mV / -7.78 dBu.
- AUX (Impedance/Sensitivity): 50 k / 316 mV / -7.78 dBu.
- Low Impedance: 4, 8 .
- High Impedance Line: 25 / 70 /100 V.
- Frequency Response: 50 Hz - 17 kHz +/- 3 dB.
- EQ control:
· Bass: (+/- 10 dB)/ 22 Hz - 180 Hz/ Centre freq. 50 Hz.
· Treble: (+/- 10 dB)/ 3k Hz - 20 kHz/ Centre freq. 12 kHz.
- S/N Ratio: >90 dB (Line), >80 dB (MIC).
- THD: Less than 1% at 1 kHz, rated power.
- Chime: 2 tone chime (Ding-dong attending signal preceding a call).
- Priority: Tel./Emer. - MIC 1.
- Main supply AC Power: 115/230 V - 50/60 Hz.
- Consumption: 1100 W.
- Dimensions (WxHxD): 483 x 132 x 410 mm.
- Weight: 25.2 kg.